note:This kit does not need to be soldered, it comes with RGB patch lights, directly press the upper shaft body, press the key cap, and you can use it directly!【Shafts and keycaps are available in our shop】
GK61 semi-finished kit(Shell + PCB + positioning board + satellite shaft + TYPE C data cable + MD patch light + hot plug shaft seat)
After many verifications, when installing the shaft body, the PCB and positioning board are removed and placed on the table to insert the shaft, so that the shaft seat on the back of the PCB is supported, which can greatly reduce the shaft seat deformation or desoldering caused by the misalignment of the insert shaft phenomenon.
The main parameters:
*GK61 RGB PCB is compatible with most common 60 shells, the kit only supports GK61 shell
*32-bit master MCU
*8M onboard storage Flash
*3pcs 256*256*256 LED driver chip supports 16.8 million colors full color RGB
*USB Type-C pluggable cable
*The upper lamp position is reversed with RGB, compatible with three-pin / five-pin MX mechanical shaft bodies such as Cherry, BOX, G-axis
*Kaihua shaft socket connector with MX shaft pluggable terminal
*Support music rhythm sound control lighting effects, drive custom macro programming buttons, three-layer configurable configuration
*GK61 RGB 60 key PCB is compatible with most general-purpose 60 enclosures.
*32 bit MCU
*Built in 8M Flash
*3 256*256*256LED driver chip supports 16.8Million colors LED
*Type-C Usb cable
* The lamp position is anti RGB, compatible with Cherry, BOX, G axis and other three feet or five feet MX switch
* Hot pluggable Kailh connector
* Support music rhythm and sound control, drive custom macro programming keys, three layers can be defined.
Support: Cherry rgb axis, Kaihua box axis, G axis patch axis, etc. If you don’t understand, please consult customer service.